At Tile Gallery we offer the latest styles in Ceramics, Porcelains, Natural Stones, Travertines for the best prices in the Australian marketplace.

Drilling Porcelain Tiles : The Guide

by Tiles Online on January 19, 2013

Drilling Porcelain Tiles: Step-by-Step Guide

porcelain tiles Do you want to learn how is drilling porcelain tiles done? This post will guide you by giving clear steps that would be crucial in your drilling process. Drilling porcelain tiles could be required if you need to set up accessories in your bathroom or virtually any room that’s got porcelain tiles. For illustration, by drilling the porcelain tiles, you would be equipped to put bathroom shaving cabinet, a mirror, soap dish, towel rails, or even your beauty products holder.

To get you started your drilling activity, you should first determine what type of supplies you’ll need to do the work. Listed below are the equipments you’ll need:

RCD Breaker

Drill Bits of Diamond Core (Good Quality)

Masonry Drill Bits (Bundled w/ quality drill bits)

Drill Bit of Carbide Pilot ( this can be used if you’ll drill 13-mm hole or bigger holes)

Equipment for Water Cooling

Drilling Device

Safety Glasses or Goggles

These materials can be bought in different stores. You can simply get these before proceeding to your drilling activity. You should make sure of the quality of the tools first so that the result of the drilling will be ideal for your need.

One other thing you should take into account with drilling porcelain tiles is the hole sizes you are about to create. It is fairly important for the size or diameter of the hole will determine how big the drill bit you’re going to use.

After determining the diameter of the holes you’re going to drill and preparing the equipments you’ll need for the drilling, you can start to commence drilling your porcelain tiles. Make sure to sport your safety goggles to keep your eye free from dirt as well as avoidance of electric shock with RCD.

These proceeding steps will be for holes about 10mm or less in diameter with diamond cores.

1. Put an indicator in the hole’s center. You can either utilize a sticky tape or perhaps lead pencil.

2. Look for the appropriate size of the diamond core bit. Then, attach it to the electric drill. Make sure that there is a supply of water from any cooling equipment is at a constant. (Water cooling devices are essential in keeping it certain that there’s a constant cool temperature in the diamond core bit and will also prevent debris as you are drilling the hole. Avoid using handheld aspirator or wet sponge, for these never render enough coolant to the diamond core bit.)

3. Your drill needs to be positioned between 1000 & 1500 rpm. Preferring the marker as your marking tool, it’s most appropriate to implement the “Leaning In” method.

*Method of Leaning In- With an angle, you’ll begin to drill. When you see the drill cuts the tile, your drill must be in horizontal position. Make sure that there’s sufficient pressure laid and turn the drill till the hole is completely drilled.

*Method using Sticky tape- Place sticky tape on the wall just where you need the hole. This helps to stop the drill bit from slipping.

4. Tip- I received an excellent tip from www.tfo.com.au. Once the hole has started, don’t use a lot of pressure have the drill do the work

porcelain tiles

Incoming search terms:

  • drilling porcelain tiles

Leave a Comment

Previous post:

Next post: